Researchers at Penn State and Shinshu University in Japan have developed a simple, scalable method of making graphene oxide (GO) fibers that are strong, stretchable and can be easily scrolled into yarns with strengths approaching that of Kevlar.
According to information provided by Penn State University, the researchers made a thin film of graphene oxide by chemically exfoliating graphite into graphene flakes, which were then mixed with water and concentrated by centrifugation into a thick slurry. The slurry was spread by bar coating—something like a squeegee—across a large plate. When the slurry dries, it becomes a large-area transparent film that can be carefully lifted off without tearing. The film is cut into narrow strips and wound on itself with an automatic fiber scroller, resulting in a fiber that can be knotted and stretched without fracturing.
“We found this graphene oxide fiber was very strong, much better than other carbon fibers. We believe that pockets of air inside the fiber keep it from being brittle,” says Mauricio Terrones, professor of physics, chemistry and materials science and engineering at Penn State.
Terrones and colleagues believe this method opens up multiple possibilities for useful products. For example, removing oxygen from the GO fiber results in a graphene fiber with high electrical conductivity, and adding silver nanorods to the graphene film would increase the conductivity to the same as copper, which could make it a much lighter weight replacement for copper transmission lines.
“The importance is that we can do almost any material, and that could open up many avenues. It’s a lightweight material with multifunctional properties,” Terrones says.